Some minor updates to the reel, since the new year has started, the VFX shots remain the same, but there's some additional front-loaded tracking material since I've been spending some time working on that lately and the joys of 3D space reconstruction.

>> Shot 01 - Tracking/PFTrack
Source footage showing a barrel roll in what I believe was a quadcopter. There was a short stretch of footage shot after the event which allowed reconstruction of several points as 'virtual' surveys, which helped pin down the camera solve enough to track out the central road, along with the car.

>> Shot 02 - Tracking/Nuke
The original footage shot was from a handheld camera, so contained a little bit of bounce and wobble, along with drift of the actor off-center and an unwanted whip motion near the end. These were all smoothed out using some simple 2D tracking and hand-keying to blend the motion together.

>> Shot 03 - Tracking/PFTrack
Object and camera tracking of the prop with subsequent handkey of the object track for a tighter rebuild (particularly in the hand region) and better matching to in-camera perspective.

>> Shot 04 - Tracking/PFTrack
Deforming object tracking of a newspaper and the reconstruction of the gross motion.

>> Shot 05 - Natural History Museum set extension
Demonstration of matching in CG both from a lighting and texturing perspective, but also in terms of copying existing architectural style (e.g. stained glass rear windows are replicas of windows elsewhere found in the museum, and the archway detail is derived from the architect's original sketches) and tracking sufficient to allow stable placement of additional CG on surfaces and to create a stable cutout for cleanup of plate elements and replacement with brickwork and a long extension archway.

Shot broken down into three separate zones of work (front handrail, cutout, rear extension) to allow maximum flexibility in re-rendering elements, and to allow for per-zone control of lighting to speed up rendering as needed.

>> Shot 06 - West 12 corridor
Shot tracked quite heavily to allow for placement of CG objects on all major surfaces, along with supporting a detailed environment rebuild for light simulation and accurate reflection/shadow management - in particular, the cleanup of pre-existing reflections and adding new reflections on the left hand side fire door.

Due to issues with shadows and shadow ray penetration of walls, heavy use was made of the MIP matteshadow material and a direct light simulation to accurately place direct shadows and modify indirect light as a result of the new CG elements. The plate itself suffered from a poor white balance and no reference white/grey balls were available so synthetic white and grey balls were inserted and the light rig was tuned by eye so that the synthetic reference responded in a consistent fashion. These were later used to key a global grade to try restore the white balance.

>> Shot 07 - Houdini/Volumetrics
First major foray into using the Houdini/Mantra setup and volumetric rendering with clouds, and stretching some mental muscles to produce a controllable lightning system. Self-shot footage - done in a sequence of clips for each action and stitched together to form the sequence - with a locked off 500D. Twin emphasis in this shot was to set up and render a volumetric element with control, and also to play around and get to grips with Mantra and building custom networks in Houdini as a precursor to creating artist tools.

On the volumetric side, the cloud shape is initially defined via arbitrary geometry and uses particles and metaballs to provide a transition from the emitter, and a degree of 'squishability'. Conversion to a volume and addition of procedural noise is through a volume vop shader and rendering takes advantage of Mantra in micropolygon mode along with the new pyro shader.

Lightning is created via an L-system for general shape which is then fed into a custom VEX network to control aspects such as bolt length along path, tint, width, and whether or not to use a pulse along the bolt tip (to simulate the bright leading points on lightning) or the major energy discharge path (the main strike when a bolt connects from cloud to ground)

>> Shot 08 - Product shot, Tresemme
Completely synthetic product shot with particular emphasis placed on timing and light management, and an opportunity to try out the mental ray fast skin shader to replicate translucent plastic.

Loading more stuff…

Hmm…it looks like things are taking a while to load. Try again?

Loading videos…