Got my OpenPilot Revolution for over a month ago so it was time to test it. This is more or less straight from the box and I used my old settings from the Disco that I used with a CC3D controller.
This will be great when she get tuned in and the problem at the end was due to loss of video feed and I cut the throttle. As you can see, the TBS Discovery is a really tough frame and can handle a lot :) The damage to the quad was only one propeller but if you look at the LiPo you get a sense of how hard the impact was.
For for this early Revolution firmware I think the TBS Discovery is a perfect choice ;)
Frame: TBS Discovery
Flight Controller: OpenPilot Revolution
Motors: KopterWorx KW2 840KV/200W
ESC's: RCTimer 30A ESC w/ Simon K firmware
Props: Graupner 10x5 E-Prop
Battery: Zippy Compact 4s 4000mah 25C
RC TX / RX: 2.4 GHz Jeti DC-16 / Duplex R9
Voltage Regulator: TBS Core
Cameras: TBS 69 / GoPro Hero2 @ 720/60
A/V TX: TBS Rookie 5.8GHz
A/V RX: FatShark Predator V2 Integrated 5.8GHz
Displays: FatShark Predator V2 Video Goggles
OSD: TBS Core
Location: Lund, Sweden
Weather: Cloudy 18°C; Wind 9 m/s
Loading more stuff…
Hmm…it looks like things are taking a while to load. Try again?