This is a walk-around video of my new MSH Protos helicopter, showing some of the features and details. Purchased from elektrorc.com (great service!)
Specifications:

Motor: Stock (included with kit)
Pinion: 15T
Batteries: 7S A123
ESC: Kontronik Jazz 80-6-18
Cyclic: Hitec HS-5245MG
Gyro / Tail: Spartan 760 / Futaba 9257
Blades: SAB 430mm (included with kit)
Radio: AR7000 / JR X9303
RTF Weight: 1750g

This is the first flight of my new MSH Protos helicopter. This was in flight mode 1, governor set to 2400 rpm. Flight time was 4.5 minutes, and recharge data showed 1115 mah returned to the pack during a 14 minute recharge. Based on that, flight times can be safely extended to 6.5 to 7 minutes with this headspeed and flying style.

Specifications:

Motor: Stock (included with kit)
Pinion: 15T
Batteries: 7S A123
ESC: Kontronik Jazz 80-6-18
Cyclic: Hitec HS-5245MG
Gyro / Tail: Spartan 760 / Futaba 9257
Blades: SAB 430mm (included with kit)
Radio: AR7000 / JR X9303
RTF Weight: 1750g

This is the second flight of the Protos. For this flight, the governor is set to 2800 rpm. This seems to be a bit too much for this gearing, as you can hear it doesn't have enough overhead to maintain that headspeed at full pitch. Flight time is also much shorter (4 minutes) due to both the higher current draw and a pack that was slightly out of balance. At the end of the video I take some temperature readings of the various components.

Specifications:

Motor: Stock (included with kit)
Pinion: 15T
Batteries: 7S A123
ESC: Kontronik Jazz 80-6-18
Cyclic: Hitec HS-5245MG
Gyro / Tail: Spartan 760 / Futaba 9257
Blades: SAB 430mm (included with kit)
Radio: AR7000 / JR X9303
RTF Weight: 1750g

This is the third flight of my Compass Knight 3D. I had just gotten the RevMax limiter set up, and am still getting a feel for how it flies. Impression so far? YEEE HAAAAA! :^)

But seriously, it feels as light and tossable as my Protos, but has that stability and groove you only get from a bigger bird. It's lovely!

If the video is choppy/laggy - pause it and let it spool up.
The audio is bad because the cam is really only good at video. A-HD 720p. Use the little "X" in the bottom right of the video to make it full screen.

Just a quick and dirty walk around of the PhlatPrinter. Thanks to Dan P. from Boise for letting me and my son video tape his shop!

More info on the PhlatPrinter:
phlatboyz.com/

Of course, by:
allthingsthatfly.com/
Your R/C flying podcast~