DIY Camera Motion Control (Crane - jib ) with stepper or Servo Motors Under Control of a Pc/ Computer / Laptop

or cancel
  1. Mantis 2 controlling 5 axes realtime move using TB3, DP stage zero and home brew focus/zoom.

    00:40

    from MikeA / Added

    Video apologies:- Hand held Gopro Black 3+ First run with all axes running, movement limited and slow due to loose wiring and close proximity to another system. Speed increased in post X2. Mantis…

    + More details
    • Pan, Roll and Focus setting experiment using an encoder to control/record a stepper motor movement.

      03:18

      from MikeA / Added

      Attempt at a multi-move video clip with Mantis 2 hardware / software using a single hand held encoder and muliti-pass axes set up. The encoder / software was set to their coarsest settings and together…

      + More details
      • Servocity Tilt/Pan/Roll unit controlled by stepper motors

        01:15

        from MikeA / Added

        "Real time" move with tilt, pan, and roll moving through 360 degrees. The steppers are 0.9 degree step with 100:1 gearboxes driving a final pulley ratio of 6:1 giving an overall ratio…

        + More details
        • Rotation experiment.

          01:00

          from MikeA / Added

          The slight instability is caused by the light weight set up, should be ok when the arm is replaced with a more sturdy aluminium arm. The camera is attached to one end of a four foot arm and the background…

          + More details
          • 5 Axes Time-lapse test

            00:40

            from MikeA / Added

            A five axes test with Dragonframe software controlling a combination of the eMotimo TB3+ DP S0 , Arduino + Big Easy Driver to make Pan, Tilt, Track, Rotate and Focus movements. Video is created from…

            + More details
            • Computerized Motion Control Turntable test, capturing in 1080 HD and 5K with Canon T2i

              00:28

              from Bill Voelker / Added

              327 Plays / / 2 Comments

              http://wp.me/p1gR39-5C A simple test of a motion control turntable. It was set at 64 captures per revolution. Canon T2i used for both video and stills (5k) capture with 50mm f1.8 lens. More tests…

              + More details
              • "Children of Men" test

                01:14

                from Doggicam Systems / Added

                1,572 Plays / / 0 Comments

                This is actual test footage we made for our Two Axis dolly rig that was used in the car ambush scene in the Alfonso Cuaron movie "Children of Men". The split screen shows the actual camera…

                + More details
                • 7D 2000 fps

                  01:19

                  from Oton Bačar / Added

                  1M Plays / / 516 Comments

                  Second and final slow motion test...It was filmed months ago. Editing is rough because I don't have time to work on details. Edited with Twixtor in After Effects. Rain was made with Trapcode…

                  + More details
                  • Motion control test with Doggicam's MoCap test 2

                    00:46

                    from Doggicam Systems / Added

                    455 Plays / / 0 Comments

                    This is a test with our MoCap motion control and playback system. A Panasonic HVX-200 camera (set at 720p, 24pn) was used (although any camera can be used on this system), on our Sparrow Head 400…

                    + More details
                    • Motion Control test with Doggicam's MoCap 1

                      00:52

                      from Doggicam Systems / Added

                      497 Plays / / 0 Comments

                      This is a test with our MoCap motion control and playback system. A Panasonic HVX-200 camera (set at 720p, 24pn) was used (although any camera can be used on this system), on our Sparrow Head 400…

                      + More details
                      • My Wire CNC (CABLE CNC) Made by MDF

                        02:32

                        from valasoft / Added

                        890 Plays / / 1 Comment

                        My Wire CNC (CABLE CNC) Made by MDF

                        + More details
                        • MAKE presents: The LED

                          05:29

                          from Make: / Added

                          129K Plays / / 9 Comments

                          Take a tour through the world of the light-emitting diode. Learn - who invented it, how to use it, and how to make your own. Collin Cunningham: People are fascinated by light. I mean just glancing…

                          + More details

                          Your membership in this group is pending until moderator approval

                          DIY Camera Motion Control (Crane - jib ) with stepper or Servo Motors Under Control of a Pc/ Computer / Laptop

                          valasoft Created by valasoft

                          DIY Camera Motion Control (Crane) with stepper or Servo Motors Under Control of a Pc / Computer / Laptop

                          Browse This Group

                          This is a Vimeo Group. Groups allow you to create mini communities around the things you like. Check out other interesting groups. Groups