1. Alien Test Build

    00:21

    from Video Green Room / Added

    My first 3D Printed Prototype!! Made on a MAKERBOT REPLICATOR with DC analog motors from SERVOCITY and also there are slip ring assembles from ADAFRUIT.COM !!! Check it out! Printed…

    + More details
    • Cloud Gate Motion Time Lapse

      01:30

      from Michael Mikkelson / Added

      272 Plays / / 1 Comment

      Real world testing of the eMotimo time lapse rover I built using ServoCity parts. The rover travels hundreds of feet, arcing around the Bean during this sequence. 3 cameras were attached…

      + More details
      • Video vis time lapse split screen composite test.

        00:20

        from MikeA / Added

        Hi, D1, the sequence you requested - better late than never ;-) A 20 second video with panning left to right was composited with a 500 frame time lapse sequence with the same movement, video and…

        + More details
        • Repeatable moves - 4 axes difference composite experiment. - Black test.

          02:00

          from MikeA / Added

          This is a "watching paint dry" video, a two run composite using difference blending. Dolly move is 100cms total moving forward 50cms and then back to start whilst the Pan, Tilt and Roll axes each…

          + More details
          • Gopro panorama clip

            00:58

            from Rob Schutter / Added

            A test with the Gopro software to remove the fisheye effect. I must say it did a very nice job. Made with Gopro Hero Black 3+ and Servocity 4” Gearmotor pan and tilt drive.

            + More details
            • Jib crane

              00:57

              from Rob Schutter / Added

              Jib crane build with Servocity pan and tilt system and 80/20 construction aluminium. Because of the 80/20 construction system it is easy to extend it to double the hight. The tethering…

              + More details
              • Real time verse Time-lapse mode using Mantis2 - 500 frame test. Check out the bugs at 00:20...

                01:01

                from MikeA / Added

                A very quick test using Dolly, Pan, Roll and Focus axes. The movement is deliberately erractic to cram as much movement into a short time. The lens is a Canon 100mm macro lens. The video move was…

                + More details
                • Pan, Roll and Focus setting experiment using an encoder to control/record a stepper motor movement.

                  03:18

                  from MikeA / Added

                  Attempt at a multi-move video clip with Mantis 2 hardware / software using a single hand held encoder and muliti-pass axes set up. The encoder / software was set to their coarsest settings and together…

                  + More details
                  • Focus setting experiment using an encoder to control/record a stepper motor movement.

                    00:58

                    from MikeA / Added

                    A quick test using an encoder to control a focus motor. (Watching paint dry clip). The Pan move was set up using a start and an end keyframe. The Pan move was run and the focus adjusted and recorded…

                    + More details
                    • Just Sliding

                      01:22

                      from Dave Smith / Added

                      45 Plays / / 0 Comments

                      I added a motor to my slider dolly which allows me to do time lapse dolly moves and also, as shown here, some interesting macro photography. All the closeups are shot in real time with a very slow…

                      + More details

                      What are Tags?

                      Tags

                      Tags are keywords that describe videos. For example, a video of your Hawaiian vacation might be tagged with "Hawaii," "beach," "surfing," and "sunburn."