Air Turbine Spindles® 650CAT40 with Toolchanger Mounting Assembly (TMA) Milling Mild Steel at 40,000 rpm, 0.88 hp with a depth of cut of 0.005” at 200"/min / 5080mm/min using a 3 Flute 6mm Ballnose Endmill. The finish quality was better than a 32 Ra and the production time was less than 1/4 the cycle time at 10,000 RPM by the standard spindle. The governed constant high speed 650CAT40 eliminated secondary polishing processes and cut down on manufacturing time and expense.
The 650CAT40 is a workhorse with up to 0.88 hp (0.66 kW) at 25,000, 30,000 or 40,000 rpm. In 24 hour operation the patented governed high speed 650CAT40 delivers constant high speed and torque under load with high reliability and accuracy as a result of its low friction power unit with few moving parts. No Duty Cycle.
For more information, visit airturbinetools.com or call 561-994-0500