Three adjustable shoe mounts that attach to any video camera's 1/4-20 threaded hole. The two arms can be rotated 360 degrees to adjust positioning.
Today I'm going to show you the Bracket 1, Threaded multi shoe mount. We make a number of products to help accessorize your video camera. This product adds three shoe mount locations to any camcorder that has a 1/4-20 threaded hole on it. This is especially helpful for cameras that don't come with a shoe mount position as well as cameras that provide only one shoe. The bracket is made from high strength aluminum and the two arms swivel giving you a couple of different configurations to choose from. This camera has two threaded holes back here on the handle so I would put this with the higher section on the right side in case you want to mount a shotgun mike here. You can place the other arm forward or back or keep it to the side. You could put a monitor here. One of the most common things to put here is a shoe mount wireless microphone receiver such as this Sennheiser or the Sony receivers. You can certainly put a second one in one of the other shoes. I prefer to keep the antenna perpendicular to the subject for best reception although some people have a point forward which seems to work fine in most situations. This leaves another shoe here that you might want to put a light in. This may not be the configuration that you choose your camera but I'm sure you can customize it for your gear. This is a very convenient product and hopefully it will be just what you need to complete your configuration on your camera. Ask for our products at your favorite video production store or purchase right here in our website at bracket1.com. Thanks for watching!