Video of the mission #22 during an autonomous flight of my Cularis UAV done on April 2011. The purpose of this mission is to do a 5 km autonomous run under a flight plan (FPL). The FPL is composed of 5 waypoints and the Cularis UAV autopilot run the FPL during 2 loops. After this 10 minutes mission, the battery level was about 49% (Lipo 3S 2650 mAh NanoTech)... In the video you will see the forward view taken with a GoPro HD and the downward view from the FlyCam One v2 at the same time.

The weather conditions was a bit hard: Wind 15 Km/h from ESE, gusting 20 Km/h and strong thermal lifts

The Cularis UAV autopilot setup is:

- Autopilot: Ardupilot (Atmega 328)@16MHZ + ArduIMU flat v2

- ardupilot v2.8.1 (JLN) + arduimu v1.8.3 (JLN)

Sensors: (arduIMU on board):
•3 Axis Accelerometer (ADXL335)
•3 Axis Gyroscope (LPR530AL + LY530ALH)
•3 Axis magnetometer (HMC 5843)
•1 pressure sensor (air speed sensor)
•1 GPS U-Blox5 GS407

Video cameras:
•1 GoPro HD Wide (forward view)
•1 FlyCam One v1 (downward view)

Real time telemetry:
- Low speed with Multiplex M-Link
- High speed datalink with Xbee pro

More infos at:

Loading more stuff…

Hmm…it looks like things are taking a while to load. Try again?

Loading videos…