Z4387 Packrite BAG SEALER Y0500 Alard SINGLE STATION BAG PACKING TABLE VIDEO DEMO.
SINGLE-STATION NETWEIGH BAG FILLING TABLE, with wash-down scale, and adjustable height pneumatic bag-holder, all food grade stainless steel...
A food grade sanitary stainless steel BAG PACKING TABLE / hand-pack bag filler for fresh-cut / pre-cut produce packaging, with a remote readout scale, and adjustable height pneumatic bag-holder.
~ The operator hangs the bag on the bag-filling funnel and engages the bag holder by pressing a button.
~ The operator then pulls product by hand, from the table into the filling tube, until the proper weight is made, as indicated by the eye-level over/under scale. A little product easily be remove if needed to "make weight".
~ The operator then disengages the bag holder and removes the bag, puts a new bag in place, and
the process is repeated.
~ The stainless steel bag-filler / pack table is 43 inches long by 37.5 inches wide inner/working dimensions, and has sides that taper from 14 inches high at the back, and angles down to 6 inches high at the front.
~ 30 pound capacity Cardinal wash-down over-under scale, with remote readout mounted at eye level. Other model scales / capacity are/is available to customer specification; CALL 315-589-4511 to confirm availability to discuss your particular fruit and/or vegetable netweigh bag filler pecifications.
~ 6.25 inch diameter front center filling tube. (Can be supplied with filling tube inserts for smaller size bags).
~ Stainless steel pneumatic bag holder with push-button operator control for holding bag on the filling tube.
~ Beneath the bag holder is a 10inch square stainless steel weigh cell platform which is adjustable to accommodate different bag heights.
~ 40 inch working height at front lip, on threaded rod adjustable feet with foot-pads. NOTE: Pictures show optional casters, available at extra-cost; --call 315-589-4511 to discuss your specific pack table specifications.
~ All food grade sanitary stainless steel construction.
~ 110 volt single phase electrical input (standard household current) for the scales, and requires compressed air for the bag holders.
While we occasionally sell out of on-hand machnines, we maintain this by-hand bag-filler in stock as continuously as possible; --NEW, fully assembled, ready to go and available for immediate shipment. CALL 315-589-4511 to confirm present availability, and to discuss your particular pre-cut produce / fresh produce packaging equipment needs.
You may view a pictures of this machine at
on our general listings page under "F" for FILLER, BAG....
Alard item reference #:Y0500
NEW PACKRITE / BANDRITE Model 6000 CONTINUOUS BAND SEALER.
Complete with digital temperature control, variable speed drive (110 volt single phase input). Flat seal, specify 3/8" or 3/4" seal width; and you may specify feed direction (left to right or right to left). Standard adjustable height standis mild steel with USDA approved paint. Stainless steel top and side shrouding. Manufacturer rated for up to 550 inches per minute on up to 10 mil thicknesses.
Additional (NON-included) options available: Stainless steel adjustable height stand, casters for portatility, swivel mount, bag trimmer with or without vacuum, corrosion resistant stainless steel bottom plates, coder (ink or emboss type), Markem coder suitable for up to 3 rows of 1/8" type, crimpers, pressure rollers, bag perforator, 230 volt operation, fixed 750 inch per minute option.
The Model 6000 is designed for food (USDA listed), military, agricultural and many other applications. It seals most types of barrier materials in addition to straight polyethylene up to 12 mil single thickness or 6 mil single thickness on bags with gussets (24 mil total). Change over from one material to another is done with very little or no adjustment required.
The Model 6000 Band Sealer provides a flat seal, or when equipped with the optional crimper it makes a checkered seal impression (it gives a nice cosmetic appearance on clear polypropylene materials). Various seal widths are available.
Maintenance on this machine is designed to be user friendly. Sealing band change can be made in minutes without tools due to our tilt-away drive system (no tools required band change has been standard at PackRite for more than a decade). If required, replacement of the temperature controller is snap-in, snap-out, no disconnecting or reconnecting of wiring is necessary.
You may view a picture of this machine at alard-equipment.com
on our general listings page under "B" for BAG SEALER. NEW!
Alard item reference #:Z4387