This is my Trex 500 testing out some new settings to see what my flight times would be running a Thunder Power Extreme V2 3300 mah 25c 5-cell lipo.

-Stock Align motor/Esc.
-Ar7000 W/DX7.
-Futaba GY401 W/Futaba 9254 W/Step down regulator.
-HS-5245 MG programable servos for cyclic.
-Castle Creations 10 amp BEC.
-Align carbon fiber main blades/ paddles/ tail.
-All CNC.
-Torque Tube set-up replacing the belt drive system.

Flying weight is 4 lbs 5.9 oz. and in the video switched out the 16t and installed a 15t pinion, and running the timing on high.

Flown in idle 1 with a 100% throttle curve across.
Using battery pack #1 of 4.

Swash mix =

Aileron : 85%
Elev : 85%
Pitch : 69%


Gyro gain set at 78%

Flying time for this set-up was 6 minutes 45 seconds...

Loading more stuff…

Hmm…it looks like things are taking a while to load. Try again?

Loading videos…