I wanted to use our still-new Doepfer A-118 Noise source in a drum pattern. This is the result.
Here's the patch:
The envelope generator on the Moog Rogue is set to auto-trigger itself.
The Audio Out from the Moog Rogue is sent to the Symmetrical input on the A-119 External Input, only to trigger its Gate output (the Audio Out on the 119 is not used).
The Gate Out from the A-119 is sent to a multiple, and from there to:
1. The Trig. In on an A-160 Clock Divider
2. The Gate In on an A-140 Envelope Generator
The /4 output on the 160 is triggering a Boss Dr. Pad (Snare 1 setting). The output from the Dr. Pad is sent to the mixer (off screen).
The /8 output on the 160 is triggering the first envelope on the A-143-1 Complex Envelope Generator (set to Attack-Decay mode) the output of which is opening the bottom VCA on the A-132-3 Dual VCA. The output on the bottom VCA is sent to a mixer (off screen).
The CP2 gate out on the 143-1's second channel (set to LFO mode) is patched to the CV In on an A-150 Dual Voltage Controlled Switch (here acting as a VCA). The output of the 150 is send to the mixer (off screen).
The triangle output from a Plan B ELF LFO is sent to a Frostwave Resonator's input, the output of which is connected to a Frostwave Blue Ringer. The Ringer's output is patched to the Input on the upper 132-3 VCA; the output of the upper VCA is sent to the mixer (off screen).
The White Noise output from the 118 is sent to the In 2 input on an A-196 Phase Locked Loop. The Phase Comp. Output from the 196 is sent to the first Input on the A-150. The second input is left unpatched.
The Colored Noise output from the 118 is sent to the Input on the bottom 132-3 VCA.
The first output on the 140 is opening the upper 132-3 VCA.
The second output on the 140 is sent to a multiple, and from there to:
1. the Low Pass Frequency CV In the Resonator
2. to an attenuator, and then to the CV In on the Ringer
I think that's everything. Two A-118 noise channels, one Dr. Pad channel and one M37-->filter-->ring modulator channel. Panned for stereo but otherwise no outboard effects used.