The AM40 is a digital protractor designed to measure the bend angle of numerous bend configurations of small tubing, semi-rigid coax and sheet metal. Its measuring range is from 0 to 360 degrees in increments of 0.1 degrees. The AM40 digital protractor uses a high-resolution encoder to ensure the repeatability of the bend angle measurement. The digital readout, displayed in large numerals, updates continuously to show the real-time bend angle.
The AM40 digital protractor uses two arms to measure a bend angle. One arm is fixed and the other arm (dynamic) has two axis of motion. The dynamic arm has both rotational and linear motion.
The rotational motion is guided by sealed roller bearings and the linear motion is guided by a linear ball bearing. These combined motions allow the AM75 digital protractor to move quickly from one bend configuration to another while at the same time providing sensitivity for accurate measuring. Patented.
Operation Manual for AM40 (provided at wintonmachine.com), located under "digital measuring, tubing"
All digital protractors are designed and tested in house. We use standard purchased components to build every digital protractor. We at Winton are proud of the quality of every measuring machine sold.
Please, call us today and ask how the quality of the bend angle measuring machines will translate into quality bent parts on your shop floor.
•Displayed resolution: 0.1°
•Weight 8 lbs.
•Dimensions: 12" x 12" x 3" deep
•Power input: 110/220 VAC, 0.5A draw
•High resolution encoder
•2 axis dynamic arm - angle displayed
•Large LED display
•Simple to operate
•Measuring Range: 0 to 360°
•Accuracy: down to less than 0.1°, repeatability: down to less than 0.1°
Learn more on our website: wintonmachine.com/am40-angle-measuring-machine?p=62