The views and opinions expressed in these videos are those of the authors and do not necessarily reflect COPAN's official policy, recommendation or position. Always read the manufacturer’s package insert for specific instructions regarding specimen collection and transport for the type of test kit being used.
00:17 Each eSwab collection system consists of a sterile peel pouch that contains a Nylon Flocked Swab, with molded breakpoint marked with pink line, and one Screw-cap tube with 1 ml of modified Liquid Amies Transport medium.
00:19 eSwab is easy to use:
00:21 Put on gloves.
00:24 Open the peel pouch.
00:31 Remove the swab.
00:39 Collect the patient's sample using the swab.
00:48 Remove the screw cap from the tube and insert the swab all the way to the bottom of the tube.
00:59 Holding the swab shaft close to the rim of the tube, break the applicator shaft at the colour breakpoint indication line.
1:02 Hold the tube opening away from your face.
1:10 Screw the cap on tightly to prevent leakage.
1:21 Write the patient's information on the tube or apply a label.
1:26 Apply label vertically on the tube as shown.
The ESwab fluid maintains the viability of diverse bacteria.
Do not send a dry ESwab as this will lead to unsatisfactory results. If the tube spills its contents prior to inserting the swab, the liquid is non-toxic.
1:52 Simply put the swab into another tube before sending it to the laboratory and discard the spilled tube.
Learn more here: copanusa.com/education/videos/copan-eswab-how-to-use-training-video
Visit COPAN's official website to learn more: copanusa.com/products/liquid-based-microbiology/eswab/