1. This is our Auto360. It uses our patent pending automatic triggering system to fire the camera shutter for 4, 5, or 6 shot panoramas every 90, 72, or 60 degrees (user selectable).

    It is intended for use on 600 - 900 size multirotor aircraft.

    A servo motor is used to pan the camera mount. As the mount pans the triggering system activates the camera shutter. Thus, only a single extra RC channel is required. Simply hit the switch on your transmitter, the mount begins panning and capturing images at exactly every 90, 72, or 60 degrees as you configure it.

    It can be used with the landing gear as shown, or the landing gear can be removed for multirotors with retractable landing gear.

    Here are some final output 360 spherical samples:


    # vimeo.com/86435837 Uploaded 1,329 Plays 0 Comments
  2. Our FlyLine Cable Dolly is a super-fast, point-to-point, gyroscopically righted cable dolly that can reach speeds of up to 50 KPH and move as slow as 0.5 metres a minute. We use Kenyon KS4 gyros to stabilise the dolly. One gyro is enough to do the job in most situations. However, multiple gyros can be attached if it gets too windy! The ARB energy recovery system gives it a battery life of approx. 90 minutes and the batteries are easy to swap out too.

    Depending on location, set-up times can take as little as an hour, and it can be remotely operated up to a range of 1km. The rigging time varies depending on the complexity of the shoot. Once the rope is set up the cable dolly can be attached and detached very easily. This opens up the opportunity for multiple ropes being utilised in a single days shoot. The cable dolly is attached to a Freefly MoVI M10 or M15 for 360-degree footage capture, with a live feed sent to director monitors.

    Our gimbals offer the opportunity to capture content for your film that is normally the preserve of blockbuster budgets. These handheld 3-axis camera stabilisers are a fantastic way to add super smooth shots to your film.

    # vimeo.com/122120274 Uploaded 829 Plays 0 Comments
  3. A demo showing how 'Follow' mode works on Phoenix A10 with new firmware v2.3

    More information at:


    # vimeo.com/79509912 Uploaded 1,136 Plays 2 Comments
  4. Initial test flight to see how iSTAR handles on a UAV. Testing was done using a UAV from PhotoShipOne and location was kindly provided by Bill Bailey at Nodal Ninja in Chandler, Arizona.

    # vimeo.com/97081013 Uploaded 570 Plays 0 Comments
  5. SkySight is an industry leading Motion Cinema company specializing in Radio Controlled (RC) Videography, including multi-rotor aerials, handheld MoVI operation, and Flylines.

    # vimeo.com/109833186 Uploaded 1,759 Plays 1 Comment

PhotoShip One User Videos

PhotoShip One - Alary Design Plus

Videos from users of PhotoShip One equipment

Browse This Channel

Shout Box

Heads up: the shoutbox will be retiring soon. It’s tired of working, and can’t wait to relax. You can still send a message to the channel owner, though!

Channels are a simple, beautiful way to showcase and watch videos. Browse more Channels.