1. Had some visitors here in Fort Myers from the east coast, Rob Mapp, Marc Shuster, and Donald Shelbrick, all throwin down at Revolution Cable. The guys over there, yet again, pulled threw and provided us an awesome day for filming and riding. Nick Kamper was also out there showin his skills along with revolution rider/employee Josh Wright. Enjoy


    # vimeo.com/11643857 Uploaded 3,776 Plays 10 Comments
  2. I've seen tons of plans for these things. Here's mine! This project can be done for under $100 (if you don't screw it up like I did). The audio is horrid, I know. Don't care though! Below is a list of parts you will need, you can figure out what tools to use. I include some footage at the end, using this dolly. If you have a slow computer, or you don't have the most recent copy of flash installed, panning and side motions (hell, any motion) will look like crap! Viewed this video on a computer other than mine & I couldn't watch it. Too damn jerky! And YES, this is "No Budget" compared to what you would pay for a pro setup.

    (1) 32" square x 3/4" thick piece of plywood
    (8) Soft inline skate wheels
    (2) 32" pieces of 1 1/2" angle aluminum (1/8" wall thickness)
    (8) 1/4" / 20x2" hex bolts
    (8) 1/4" flat washers
    (28) 1/4" nuts
    (16) 1 1/4" fender washers
    (4) 1/4"x2 1/2" carriage bolts
    (2) 10' pieces of 1" sch. 40 PVC pipe
    (1) 5/16" drill bit
    (1) Medium size drill bit (smaller then your 5/16" bit)
    (1) Small drill bit (I used a 9/32" bit for my starter holes)

    More no budget tutorials here: Jay Boy's No Budget Tutorials

    # vimeo.com/898335 Uploaded 77K Plays 94 Comments
  3. # vimeo.com/7355078 Uploaded 10.7K Plays 7 Comments
  4. First shots from my $60 Homemade Rollerblade wheel Dolly--I was really surprised how smooth it came out!

    Shot at 1080p@24fps with my 7D, played at normal speed.

    Sigma 30mm, 1.4 Lens.

    Music: Thomas Newman

    See Pictures below.

    Please feel free to comment!

    Don't for get to give me a "Like" =-).

    Note: Playback will be jerky when viewed with Internet Explorer.

    # vimeo.com/9194904 Uploaded 8,645 Plays 78 Comments

Film Tips/Tricks/Equipment/Rigs

Brian Miller

Browse This Channel

Shout Box

Heads up: the shoutbox will be retiring soon. It’s tired of working, and can’t wait to relax. You can still send a message to the channel owner, though!

Channels are a simple, beautiful way to showcase and watch videos. Browse more Channels.