Alright we're at Speedy Equipment Rentals and we're here to put some lettering on the door. I'm going to do this one a little bit different just because the size of the door and the number of different decals there are. We chose to go with cut vinyl letters rather than printed vinyl letters. So we'll be installing this one section at a time. The first decal will be installed as a center decal. That will be the logo that goes right here. What I've done is I've marked out where the bottom where each of those are going to go. That will give us our vertical placement. I want them to be centered so what I'm doing is I'm just taking them and starting two and a half inches from the edge of the door. You'll see that as I get going. I'll put lines on the door so you can see where the marks are. So come over her first and we'll get our bottom line using a wax pencil. On the decals I don't need to put a lot of markings. The only one we need to mark up is the first one because we're doing it as a center install. So now I'll just align the lines up with the door and decal and we'll have that installed.