1. http://www.1meboat.com 0450018840 peter de jong facebook see you there
    BRAND NEW BOAT HULL DESIGN
    MOTOR BOAT HULLS
    JET SKI HULLS less pounding through waves for racing & fun
    SAIL BOAT HULLS

    My Goal
    Lower the carbon foot print not just for boats but for shipping

    My Campaign on Pozible
    As I explain below

    Lower your fuel bill
    What other design can do this
    No pounding on the waves or water
    the payload does not even slow this design down, this tells me that the hull loaded Won’t use much more fuel than empty saving $$$$$$$$$$$ if you are a professional fisherman you should take a very good look at this design straight through waves head on or straight over waves and up the other side in following seas designed naturally to lean back on the water to help keep the front up higher not at the bottom of the wave face.
    Less stress on you and the hull. Come and try and see for yourself how good below the water line were it counts the three dimensional design really is.

    Evolution
    Evolution has allowed me to design a shape that can carry a load hardly effecting the speed, acceleration or fuel consumption the smaller centre vee with the three dimensional fish shape below the water line.
    Evolution has made this a reality. As Fish do not pound on water neither does MEBOAT.
    As you can see trim tabs vertical on the centre to the transom act as tail fins using the power of the jet of water passing below the hull works brilliant.

    Tested
    The 8m promotion boat Hull all ready tested and on the water.
    Designed to naturally lean back on the water, this keeps the front up.
    Carrying a tone of weight this boat can still go from a standing start of 0km to 50km-60km in three seconds with a old 250 hp engine the pay load doesn’t slow the hull down.

    jet ski hulls That kick ASS
    Can‘t wait to ride one of these babies want a race sea do ill win hands down.
    Looking for feed back to see who would like to see us race?

    Race
    I am trying to see how many people are interested in this design as a jet ski, motor hull, sail hull and the race? click like me on youtube videos and facebook links are below
    don’t forget cheers.

    With crowd funding the design can be built from the size of jet skies for racing or recreational less pounding on waves more fun and faster through the waves and be able to hold on to the machine less impact on the machine and rider = more fun.

    Dream come true
    I am one man from a boy who has made his dream come true to build a boat hull that truly is beyond my wildest imagination of achievement,
    evolution has taken millions of years to shape fish to save energy being in water twenty four hours a day they need to. Cost of patents steel dreams.

    Test Drives
    Started on the 23-11-2012 call me or email me to arrange a time
    peter.a.dejong@hotmail.com 0450018840

    Funding Pledges will go to

    Rent a Place of Business.
    Employ trades men to fast track finish cosmetics on the 8m promotion hull,
    Start building moulds off of the 8m promotion hull. 2 top moulds a centre console top & a half cabin top, and 1 bottom mould.
    Red tape, to meet regulations to start production
    Start production of the 8m three dimensional design.
    To build a proto jet ski hull & moulds and start production of the New three dimensional designed Jet Ski hulls and moulds.

    Less water displacement
    The water that needs to be displaced only changes in length this means the water that needs to be moved and then changed in direction in the width before the hull can pass
    Water dynamics
    The width of the water dynamics stay the same, you don’t change the size of the centre vee you only widen the flat surfaced areas that has next to no resistance by 500mm each side of the centre vee to keep the proportions right so the12m will do the same speed with the same size engine and acceleration as the 8m but with better reach in length.

    Almost defies physics
    But here is the kicker as explained on my web site 12m using same size engine same speed and acceleration as the 8m three dimensional boat hull design.
    this design almost defies physics increasing the size of the hull with out increasing the width of the water volume, http://www.1meboat.com

    Payload
    With the same size engine as I have already stated above I have proven with the payload over a tone in weight not slowing the 8m hull down of 0km to 50km-60km in three seconds. through some what stays the same.

    Wedge
    A forward counter weight down in the centre vee works with the leg of the engine below the water line that is below the centre of gravity for self standing the smaller and steeper angled centre vee gives a better wedge of stability.
    The smaller the contact area of a wave face gives the weighted hull the force the power and movability.
    have a great Day
    Cheers

    # vimeo.com/55520284 Uploaded 308 Plays 0 Comments
  2. http://www.facebooklogin http://www.1meboat.com http://www.pozible.com crowd funding Australian projects  
    Designed engineered to use evolution The shape proportioned prevents pounding, weight becomes the force, below gravity the vee self stands, less water volume means less resistance to pass through,

    Designed to have a closer fuel consumption in rough or calm water loaded or unloaded faster or slower.
    Designed to be a water displacement and planing hull in one
    Designed Not to pound on flat water, rough water or waves.
    Designed not to pound on the quarter side of the hull.

    Designed not to have presser on the bow and transom to soften pounding and lower water resistance.

    Designed to have less stern drag.
    Designed to have a quick reaction and recovery.
    Designed to go faster through waves with better control.
    Designed with a split main beam to move the pivot point forward from the stern this releases the bow from the wave face earlier.
    Designed with the forward pivot point for the motor to have better control over the lower earlier released bow.

    Designed to have less up and down movement from bow to stern for better control.
    Designed To go through waves head on.
    Designed not to have a delayed reaction accelerating.
    Designed naturally to lean back on the water wile getting darted forward at the same time.
    Designed not to drag the stern.
    Designed to keep the front up.
    Designed to go up over waves and down the other side in following seas.
    Designed shaped not to track waves.
    Designed to be the opposite shape of a wave face side on to a wave.
    Designed for the shape to stand up straighter side on to a wave face.

    Designed weighted below the water line the centre of gravity.
    Designed to have a smaller contact area on a wave face to lessen the water volume and power of the wave.

    Designed to have a narrow contact of the wave face
    Designed for the lower forward weight to be the force to have the power over the smaller water volume.
    Designed to have better control on a wave face.
    Designed shaped with a smaller weighted stepper centre vee the wedge for self standing pendulum.
    Designed with a outside flat surface area the axle that gets narrower towards the bow and wider towards the stern.
    Designed for the out side flat surface to have a changing contact depending on the changing water conditions.
    Designed for the out side flat surface to have less water resistance.
    Designed with a deep draft and smaller centre vee.

    Designed to be three dimensional from the bottom of the hull and up to the water line.

    Designed to lower the water volume that needs to be changed in direction, moved and displaced before the hull can pass through.
     

    # vimeo.com/54993726 Uploaded 278 Plays 0 Comments

lower carbon foot print new design Meboat

peter de jong

http://www.1meboat.com eter de jong http://www.1meboat.com Inquires PH 0450018840
Trade Mark MEBOAT Director Peter de Jong
Facebook peter de jong
Bowen qld
like me on facebook…


+ More

http://www.1meboat.com eter de jong http://www.1meboat.com Inquires PH 0450018840
Trade Mark MEBOAT Director Peter de Jong
Facebook peter de jong
Bowen qld
like me on facebook

On my web site you can see the Registered and examined Design.

BRAND NEW BOAT HULL DESIGN
MOTOR BOAT HULLS
JET SKI HULLS less pounding through waves for racing & fun
SAIL BOAT HULLS

My Goal
Lower the carbon foot print not just for boats but for shipping

My Campaign on Pozible

My Campaign on Pozible
To rase $80,000 will be the first goal to give me the help needed to fast track finish cosmetics on the 8m promotion hull instead of doing the work by my self have a helping hand,
I Built this 26ft hull by my self
to Build the moulds required takes a lot of work now I need a hand.
This truly is a great cause and will give me the help I need and to then give back to the world.

Take a cast off of the start of the bottom tail section of Meboat-promotion hull design to build moulds for jet ski hulls.
To start production of THE THREE DIMENSIONAL JET SKI HULLS.
Thank you every one for your support and pledges when we reach this goal please keep pledging to fast track this project and have the right people power I need to start production of the 8m hulls and the jet ski hulls as
quick and smoothly as possible.
Once I have achieved this I will look at increasing production by building this design from 6m to 43m hulls for motor and also sail hulls.
I would like to thank you for your support-like me & or pledge.

As I explain below

Lower your fuel bill
What other design can do this
No pounding on the waves or water
the payload does not even slow this design down, this tells me that the hull loaded Won’t use much more fuel than empty saving $$$$$$$$$$$ if you are a professional fisherman you should take a very good look at this design straight through waves head on or straight over waves and up the other side in following seas designed naturally to lean back on the water to help keep the front up higher not at the bottom of the wave face.
Less stress on you and the hull. Come and try and see for yourself how good below the water line were it counts the three dimensional design really is.

Evolution
Evolution has allowed me to design a shape that can carry a load hardly effecting the speed, acceleration or fuel consumption the smaller centre vee with the three dimensional fish shape below the water line.
Evolution has made this a reality. As Fish do not pound on water neither does MEBOAT.
As you can see trim tabs vertical on the centre to the transom act as tail fins using the power of the jet of water passing below the hull works brilliant.

Tested
The 8m promotion boat Hull all ready tested and on the water.
Designed to naturally lean back on the water, this keeps the front up.
Carrying a tone of weight this boat can still go from a standing start of 0km to 50km-60km in three seconds with a old 250 hp engine the pay load doesn’t slow the hull down.

jet ski hulls That kick ASS
Can‘t wait to ride one of these babies want a race sea do ill win hands down.
Looking for feed back to see who would like to see us race?

Race
I am trying to see how many people are interested in this design as a jet ski, motor hull, sail hull and the race? click like me on youtube videos and facebook links are below
don’t forget cheers.

With crowd funding the design can be built from the size of jet skies for racing or recreational less pounding on waves more fun and faster through the waves and be able to hold on to the machine less impact on the machine and rider = more fun.

Dream come true
I am one man from a boy who has made his dream come true to build a boat hull that truly is beyond my wildest imagination of achievement,
evolution has taken millions of years to shape fish to save energy being in water twenty four hours a day they need to. Cost of patents steel dreams.

Test Drives
Started on the 23-11-2012 call me or email me to arrange a time
peter.a.dejong@hotmail.com 0450018840

Funding Pledges will go to

Rent a Place of Business.
Employ trades men to fast track finish cosmetics on the 8m promotion hull,
Start building moulds off of the 8m promotion hull. 2 top moulds a centre console top & a half cabin top, and 1 bottom mould.
Red tape, to meet regulations to start production
Start production of the 8m three dimensional design.
To build a proto jet ski hull & moulds and start production of the New three dimensional designed Jet Ski hulls and moulds.

Less water displacement
The water that needs to be displaced only changes in length this means the water that needs to be moved and then changed in direction in the width before the hull can pass
Water dynamics
The width of the water dynamics stay the same, you don’t change the size of the centre vee you only widen the flat surfaced areas that has next to no resistance by 500mm each side of the centre vee to keep the proportions right so the12m will do the same speed with the same size engine and acceleration as the 8m but with better reach in length.

Almost defies physics
But here is the kicker as explained on my web site 12m using same size engine same speed and acceleration as the 8m three dimensional boat hull design.
this design almost defies physics increasing the size of the hull with out increasing the width of the water volume, http://www.1meboat.com

Payload
With the same size engine as I have already stated above I have proven with the payload over a tone in weight not slowing the 8m hull down of 0km to 50km-60km in three seconds. through some what stays the same.

Wedge
A forward counter weight down in the centre vee works with the leg of the engine below the water line that is below the centre of gravity for self standing the smaller and steeper angled centre vee gives a better wedge of stability.
The smaller the contact area of a wave face gives the weighted hull the force the power and movability.
Proud
I am, very proud of this three dimensional boat hull design , higher than all expectations I could ever imagine.
I will be a very proud moment when the first 8m boat hull rolls off of the production line
thank you to every one for all the pledges and positive feed back.

Engine range
The design has a bigger range of engine size I got a tow from a working 17ft mackerel dory with a 40hp motor that towed meboat and planned at speed easily with out any strain at all 17ft dory + 26ft meboat =43ft of hull planing at speed in just seconds that is how good this three dimensional design is,

the 8m can use a 40hp engine and not be under powered to 300hp and not be over powered. The customer has a bigger engine range to chose from.

Businesses
Retail and manufactures if you are very proud of your merchandise-Products as I am of mine and looking for more exposure then keep one eye on meboat no pounding on the water and closer fuel consumption in rough or calm water,

loaded on unloaded there is not much deferent’s the design brings these costs to run closer together these advantages alone will make this three dimensional design the most popular boat hull design ever built,
no one will stop this design from cusses the design is to good, come and join the soft ride in meboat
no pounding straight through waves head on,
over waves and down the other side in following seas.

Design recreational or commercial
You can see the wide range the design can be used for
Motor or sail boats ski boats, jet skies, dories, pilot boats, coast guard, tugboat, police boat, SES rescue, fisheries, navy, working platforms etc, The Design can be built from 6m to 43m in length for boats and smaller for jet skies

Test Drives
Started on the 23-11-2012 call me or email me to arrange a time
peter.a.dejong@hotmail.com 0450018840

Pozible
Pozible can give the perfect platform and launch projects to full on production top end of the market state of the art designs direct from creative people in the community bitten by the cost of patents can be even up to $200,000 an on going counter productive annual payments of patents & Loans stoping production

Guru
I feel that Pozible Crowd funding truly is the financial Guru inventors, designers, Artists, Talented creative people have been searching the world for this will help to back up single man or woman intellectual property that is other wise denied.

Pledge
My pledge
First to give back to the community (the people) The world and their families.
So thank you pozible to give the rightful owner the chance to provide for his or her family this is the community at ground level. The power of the people for the people.

thank you keep watching my videos and up dates more to come cheers

Browse This Channel

Shout Box

  • peter de jong

    My 90 day campaign on pozible.com starting soon www.1 meboat.com lower the carbon foot print on water, no pounding NEW Boat Hull design motor or sail and New jet ski design help my dream come true @ pozible.com no pledge to small and Appreciated
    thank you for your support

    by peter de jong

Heads up: the shoutbox will be retiring soon. It’s tired of working, and can’t wait to relax. You can still send a message to the channel owner, though!

Channels are a simple, beautiful way to showcase and watch videos. Browse more Channels.