Screen Printing

  1. These professional, permanent, screen printing inks are for many porous and non-porous surfaces. A technological break-through, open time on the screen has been greatly extended, giving the user more time to work with individual colors without having them dry in the screen. Jacquard’s Screen Printing Inks are archival and light-fast with great resolution. The opacity of the opaque colors is unparalleled. They won’t wrinkle paper when screening art prints. Clean up is easy with soap and water. The Screen Inks are washable and dry-cleanable on natural and synthetic fabrics. Fabrics must be heat set for permanence and durability or allowed to air cure at least 72 hours.

    natural or synthetic fabric and paper, vinyl, metal, clay and leather

    Sizes - 36 Colors + Extender
    4 fl oz/118 ml (Item JSI1)
    8 fl oz/.24 L (Item JSI2)
    16 fl oz/.47 L (Item JSI3)
    quart: 32 fl oz/.95 L (Item JSIQ) - NEW tub packaging
    1 gal/3.79 L (Item JSI4) - NEW tub packaging

    Also available in Kits:

    Try our NEW Jacquard Puff Additive to add dimension to your screen ink print!

    # Uploaded
  2. These semi-transparent inks are most luminous on light colored fabrics and paper. Versatex Screen Printing Inks are ready to use right out of the jar and have a wonderfully creamy consistency. The colors are inter-mixable and can be thinned with water. Though heavily pigmented, Versatex has a soft hand. It will not wrinkle or bleed on paper. Versatex printed fabric must be heat set for permanence and wash-ability. Beautiful transparent overlays can be achieved with the use of the Clear Extender. Metallic colors and Opaque White will print over dark tones.

    silk screening, stenciling, stamping or block printing

    natural or synthetic fabric, paper and leather

    Sizes - 33 Colors + Clear Extender (Item VPI300)
    4 fl oz/118 ml (Item VPI2)
    16 fl oz/.47 L (Item VPI3)
    1 gal/3.79 L (Item VPI4)

    The color line includes 26 standard colors, 5 metallics** and 2 fluorescent* inks

    Also available
    Versatex Fixer, Kits and Sets

    # Uploaded
  3. Discharge Paste is for removing areas of color from dyed natural fabrics.

    8 fl oz/.24 L (Item CHM1330)
    quart: 32 fl oz/.95 L (Item CHM2330)
    1 gal/3.79 L (Item CHM3330)

    Discharge/Reduction Agent is a strong color remover used as a discharge medium for a wide spectrum of dyes. It is also used as a strong reduction agent for the fixation of vat dyes. It is most commonly used in the printing processes.

    8 fl oz/.24 L (Item CHM1019)

    Follow us on Facebook!

    # Uploaded
  4. Jacquard Puff Additive is used to increase the relief of prints on paper, fabric and other surfaces. Simply mix a little of the additive into your Jacquard Screen Ink (up to 20%), print as usual and then apply heat to your print. The micro-spheres in the Puff Additive expand with heat, giving you a raised print only after heating. Once puffed, the print is wash-fast and dry cleanable.­tml

    natural or synthetic fabric and paper, vinyl, metal and leather

    4 fl oz/118 ml (Item JSI1300)
    8 fl oz/.24 L (Item JSI2300)
    16 fl oz/.47 L (Item JSI3300)
    quart: 32 fl oz/.95 L (Item JSIQ300)
    1 gal/3.79 L (Item JSI4300)

    Easy Process


    Use: Add to Jacquard Screen Ink (JSI) up to 20% by weight. Mix thoroughly. Pot life of mixture is indefinite. Apply heat to print and ink will puff in all directions. For use on paper, fabric, and other surfaces.

    Finish: Puff Additive has a matte finish and will affect the semi-gloss finish of JSI in proportion to the amount added.

    Opacity: Puff Additive becomes opaque upon expansion and will opacify JSI in proportion to the amount added.

    Mesh Count: 80-305/inch (32T-122T cm) or according to ink specifications. JSI is recommended with mesh counts 80-160/inch (32T-64T cm).

    Drying/Curing: While print is wet, heat the entire ink deposit to 275˚F/135˚C using a hot air gun or oven to puff. Do not overheat. For best results, allow ink to air cure 72 hours once puffed before washing.

    Cleanup: Cleans up with water or mild detergent.

    CAUTION: Always test this product for wash-ability and durability prior to production.

    # Uploaded
  5. The Jacquard Film Marker ( is great for creating hand-drawn film positives on SolarFast Film ( for burning to silk screens for screen printing, using Jacquard Photo Emulsion (

    It is also great for creating hand-drawn film negatives for making SolarFast prints:

    # Uploaded

Screen Printing

Jacquard Products PRO

Browse This Channel

Shout Box

Heads up: the shoutbox will be retiring soon. It’s tired of working, and can’t wait to relax. You can still send a message to the channel owner, though!

Channels are a simple, beautiful way to showcase and watch videos. Browse more Channels.