Osmonics Brackish Water Reverse Osmosis model OSMO-PRO-300-PRE. Industrial Reverse Osmosis (RO) unit has a permeate rate of 300 gpm and a concentrate rate of 100 gpm. RO unit has a 4" flanged Main inlet, Backwash outlet, CIP outlet, and RO Permeate outlet and have a 2" flanged Concentrate. Water purification unit has a 75 hp Tonkaflo SS series pump. RO unit has (11) 316 stainless steel filter housings that are 8" diameter x 204" long and (9) 316 stainless steel filter housings that are 8" diameter x 240" long. Missing control panel and pre-filters. Requires 230/460 vac 3 phase electrical supply.
Acrison stainless steel screw feeder. Model 103B-2500-3500-5000-BDF4. Feed screw is 6" in diameter and 112" long (36" of screw is pigtail design, remainder is solid screw) with 60" of tube that empties to a 12.5" discharge. Screw feeder has twin conditioning augers that are 19" in diameter and 48" long. Hopper is 48" wide x 48" long at bottom and 67" wide x 72" long at top. The entire hopper is 78" tall with a 12" diameter infeed. Main screw is driven by 5 hp 180 vdc motor. Each of the conditioner screws are driven by a 3 hp 480 vac motor. Requires 480 vac 3 phase electrical power. Serial Number 84079-03. Good condition.
Hartness CTS-30 automatic pressure-sensitive tape case sealer. Serial #17-142. 2" top seal only. Stainless steel construction. Equipped with major and lead minor flap closers. Case sizes from 5.5" - 18" h x 6" - 14.75" w x 6" - 24" length. Capable of 30 cases per minute. Equipped with pnuematic case stop on feed end to prevent case jam ups. Controlled by Allen Bradley SLC 500 PLC and control screen. Requires 208/ 230 vac 3ph electrical and pnuematic supplies. Good Condition.
Sandvik stainless steel belt flaker. (There is no Manufacturers tag for model or serial number.) The belt is 47.5" wide and has a flat area length of 40'. The infeed feed height is 58". The belt has 40" diameter end turn wheels. The belt is driven by 1 hp 90 vdc motor through a gear drive and chain. The unit has a variable speed control. The belt is fed by a 2" jacket pipe with 13 spray nozzles. The unit is also equipped with a chipper with a 32" discharge height. The overall dimensions are 48' long x 70" wide x 58" high. Unit requires 230 vac 1 hp electrical supply. Unit was running when shut down and is in good condition.
Heinkel Hastalloy C4 Inverting Filter Centrifuge. Type HF300. Serial# 1028/12. The inverting fliter centrifuge is designed to dewater and dry in one process. This centrifuge uses a filter medium which catches the residual material. Then the filter is inverted to discharge the dried residual material throught the end. A video link is available for process description. The bowl is driven by a 7.5 hp hydraulic motor and turns at 3460 rpm to provide 1500 xg of g force. The bowl diameter diameter is 11.81". The filter area is 1.07 sqft. The bowl is capable of handling 1.7 gallon of prouduct. Overall dimensions of the unit 80"l x 36.5" w x 42" h. Requires 460 vac 3 ph electrical source. Shipping weight is 5000 lbs. We can not verify but the unit appears to have never been put into operation.