OpenPilot

here is the latest test flight with the NEW "Herkules III"
brushless controller for multicopter usage.

!!!!!!!!!!! This is a special 8S-capable (35V) Variant of Herkules III !!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!! Don't use 35V 8S on the normal Herkules Board !!!!!!!!!!!!!!!!!!!!!!

The test configuration is:
- Oktokopter Frame AS8, 118cm dimension between axes
- FlightControl DJI Wookong (powered by 8V Herkules BEC)
- Motor Axi 4120/20 465kV 37A
- ESC "Herkules III" 8S High Voltage Edition with active freewheeling and PPM Firmware HKIIIv3_SW095_PPM_AFW1_kHz16_ADV12 (i2c Firmware for Mikrokopter also avaible)

Props Xoar 15x6 Wood

1. Flight
6S/8.400 Lipo (2x 6S/4200)
12,8kg lift-off weight (Kopter 5,6 – Lipo 1,7 – payload 5,5)
Hover Amps = 64,6A (Hover Throttle at 65% Throttle Stick)
Max. Peak = 168A
Air Temp = 0°
ESC Temp = 6°
Motor Temp = 15°
Flight Time = 3:18 usage 3798mAh (1150mAh/min)
6S x 3.8V x 64,6A = 1473Watt mit 12,8kg => 8,7g/Watt

2. Flight
8S/10.000 Lipo (4x 4S/5000)
13,4kg lift-off weight (Kopter 5,6 – Lipo 2,3 – payload 5,5)
Hover Amps = 57,2A (Hover Throttle balance good on 45% Throttle Stick)
Max. Peak = 262A
Air Temp = 0°
ESC Temp = 8°
Motor Temp = 21°
Flight Time = 3:32 usage 3554mAh (1005mAh/min)
8S x 3.8V x 57,2A = 1739Watt mit 13,4kg => 7,7g/Watt

!!!!!!!!!!! This is a special 8S-capable (35V) Variant of Herkules III !!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!! Don't use 35V 8S on the normal Herkules Board !!!!!!!!!!!!!!!!!!!!!!

More Herkules Videos: vimeo.com/channels/herkules

Information and Order: globe-flight.de/Herkules-III-High-Power-Brushless-Regler

Part 1: 6S + 8S Graupner 14x8 vimeo.com/55182862
Part 2: 6S Fiala 15x6 vimeo.com/55984421
Part 3: 6S + 8S Xoar 15x6 vimeo.com/56004280

j vimeo.com/56004280

Loading more stuff…

Hmm…it looks like things are taking a while to load. Try again?

Loading videos…