1. ゴルフ場空撮  コース紹介

    01:09

    from Hi Time Added 42 1 0

    test

    + More details
    • █▬█ █ 奥只見 ビックキッカー  空撮 2014

      01:17

      from Hi Time Added 4,920 9 2

      2014年5月8日 CHESTNUTZと奥只見丸山スキー場の協力で空撮

      + More details
      • Actual Brushless Gimbal shot

        00:18

        from Johnny Wu Added 898 5 2

        3-Axis Brushless Gimbal shoot, Mike Bacanu on Wheelchair holding the gimbal while running with the actor, final scene will be different. ISO800, Canon 70D with Tokina 11-16mm lens. We have put together a full page of how to DIY on this link http://www.mdifilm.com/2013/?p=1291 hope it will help! We got a new one now which is WAY better to balance, WAY better to tune, and WAY better customer service. Came-7000 for DSLR and soon they will have the RED version available. We can build this for you at a nominal fee or have it available for rental with operator in Cleveland area. Check out this test run: https://vimeo.com/88721252

        + More details
        • Alexmos 3-Axis 32Bit First TEST.

          02:25

          from Hiro Added 20 0 0

          The test shot a HIROBO 40cc gasoline helicopter 3-axis gimbal.

          + More details
          • Automotive parts created using Delcam's PowerMILL

            02:06

            from Delcam AMS Added 552 3 0

            Find out why Eifel have been a Delcam customer since 1989, using PowerMILL for 5-axis machining to stay at the forefront of technology in the automotive industry. For more information visit: http://www.delcam.com/ http://www.delcam.tv/ http://www.powermill.com/

            + More details
            • 3-Axis Brushless Gimbal with Canon 70D Test 1

              01:32

              from Johnny Wu Added 950 1 3

              Here's 1st test of the 3-Axis Brushless Gimbal with Canon 70D, this is a basic test, it arrived assembled and supposed to be calibrated for 5D3, we fitted with a Tokina 11-16mm f2.8 lens and went to our location test. As mentioned, it was basically, taken out of the box, place the camera on, adjust and balance, plug battery on and that's it. NO SOFTWARE Calibration was done to it. ISO800, NOTE: This was our first gimbal, the company has the worst customer service ever and once you have returned the product, they will try their best to delay refunding by any means (one line email, ignore, etc). This is the same vendor as ExtremeGadget on Ebay or GoodluckSell.com (the controller they sold with it was a hacked version of Alexmos) We got a new one now which is WAY better to balance, WAY better to tune, and WAY better customer service. Came-7000 for DSLR and soon they will have the RED version available. For result test, click here: https://vimeo.com/album/2700210/video/88721252 We have put together a full page of how to DIY on this link http://www.mdifilm.com/2013/?p=1291 hope it will help!

              + More details
              • 3-Axis Brushless Gimbal with Canon 70D Test 2

                00:45

                from Johnny Wu Added 1,510 3 2

                Here's 2nd test of the 3-Axis Brushless Gimbal with Canon 70D, this is a basic test, it arrived assembled and supposed to be calibrated for 5D3, we fitted with a Tokina 11-16mm f2.8 lens and went to our location test. As mentioned, it was basically, taken out of the box, place the camera on, adjust and balance, plug battery on and that's it. NO SOFTWARE Calibration was done to it. ISO:800 NOTE: This was our first gimbal, the company has the worst customer service ever and once you have returned the product, they will try their best to delay refunding by any means (one line email, ignore, etc). This is the same vendor as ExtremeGadget on Ebay or GoodluckSell.com (the controller they sold with it was a hacked version of Alexmos) We have put together a full page of how to DIY on this link http://www.mdifilm.com/2013/?p=1291 hope it will help! We got a new one now which is WAY better to balance, WAY better to tune, and WAY better customer service. Came-7000 for DSLR and soon they will have the RED version available. We can build this for you at a nominal fee or have it available for rental with operator in Cleveland area. Check out this test run: https://vimeo.com/88721252

                + More details
                • 3 AXIS CNC - FCNP - BERMAQ

                  01:19

                  from Bermaq Added 118 0 0

                  3 AXIS CNC - FCNP - BERMAQ Working area: X: 3.100 mm ;Y: 2.100 mm ;Z: 250 mm No. Working areas: 2 working fields Positioning speed: X: 50 m/min ;Y: 50 m/min ;Z: 30 m/min

                  + More details
                  • 3-Axis Gimbal Test ~ BeSteady

                    02:22

                    from Steven Poe Added 1,773 15 12

                    This video is my first run with the BeSteady 3-Axis camera gimbal (stabilizer). Shooting on rough uneven terrain and running along side, with the star of the film Mr. B, really pushed the gimbal. Testing was done with two different camera and lens weight loads. The lighter load is a GH3 with Pany/Leica 25mm f1.4 and a Oly 12mm f2.0. The heavier load is a D800 with Nikkor 24mm f2 ais, and 50mm f1.2 ais. Surprisingly the heavier weight felt more stable and the follow moves more fluid. This was shot last week with the 1.0 firmware. There are some obvious problems with the tilt during quick moves, or me stumbling over rocks and branches. This week BeSteady released firmware version 1.2, and it's noticeably improved. Especially on the lighter weight load and tilt follow. Overall I'm really pleased with the 3-axis gimbal rig and the experience with the team at BeSteady. It's a great tool to have in the bag, and for me coming from multi axis motion control rigs using a gimbal really is like flying free. I'm looking forward to adding a remote follow focus to the rig and shooting my next narrative short with this combo. © Steven Poe ~ Get stock footage of these video clips at stevenpoe.com or nimia.com #labrador #video #Redwoods #stockvideo #stockfootage

                    + More details
                    • 3-Axis Gimbal Test on a DJI Phantom 2 Vision

                      00:21

                      from Marc Crowley Added 1,247 1 3

                      EvvGC Gimbal Controller Good Luck Buy Carbon Fibre Gimbal (Modified)

                      + More details

                      What are Tags?

                      Tags

                      Tags are keywords that describe videos. For example, a video of your Hawaiian vacation might be tagged with "Hawaii," "beach," "surfing," and "sunburn."