An introduction to three-point lighting

Steve once worked at and then left Vimeo to move to Michigan, get married, have a kid, and join VHX, which then became part of the Vimeo family, and now he's back. Life, man.
Stephen Niebauer
Learn the most basic form of lighting a subject for film and video using a triumvirate of light sources.

Three-point lighting is exactly what it sounds like: You light your subject from three different sources in order to control the shadows and balance the contrast. Light in general enables you to see your subject, but three-point lighting is the easiest way to make your subject look fantastic. Get started with LifeNow Video‘s explanation of the three light sources in the video above.

Three light sources

  • Key light: This is the main light source. It shines directly on the subject, usually from the front right or front left, and it establishes the overall look and feel of the shot.
  • Fill light: The fill light provides balance to the key light by ‘filling in’ the rest of the subject’s face with softer light. It should be positioned to the side that’s opposite the key light.
  • Back light: The back light creates a flattering rim of light around the subject, separating him or her from the background. Sometimes the back light is called a rim light.
Here’s a nice demonstration of three-point lighting by Bill Simmon, shot with subjects in a studio:

How to set up three-point lighting

  1. Start in the dark. Begin with all your lights off, and as little other ambient light as possible. This will help you differentiate among the three lights you’ll be turning on.
  2. Turn on your key light. Your key light is the brightest light in the scene and the one that creates the overall feel of the shot. Adjust its brightness to your liking. We recommend angling the key light about 30 degrees the right or the left of the subject. You also should position the key light in a relatively high spot to reduce shadows on the face.
  3. Add your fill light. The fill light should be on the opposite side of the key light, but still in front of the subject. Don’t make the key and fill lights symmetrical — the fill should be at the subject’s face level, and should get rid of any remaining shadows. The intensity of the fill light should be about half that of the key light.
  4. Bring in the back light. Finally, the back light separates your subject from the background. It can be placed anywhere behind the subject, but make sure to keep it out of the shot! You’ll want to angle it down from a high position to achieve a sharp outline on the edge of the subject.
Occasionally you’ll hear about four-light setups, where what’s called a hair light is used to define your subject’s (you guessed it) hair. For more details, check out this tutorial from the fine folks at StillMotion:

Notice that light placement is critical, with subject definition dependent on how the lights are angled. Additionally, it’s important to consider soft lighting — also known as diffusion — to keep glare to minimum. Finally, remember that colored gels can be placed over your lights to change the tone of your shots. They can really help establish a mood for your scene by affecting the white balance. So there you have it: basic three-point lighting. Try it out on your next subject and see how quickly it can elevate the quality of your work.

Once you've shot your perfect scene, take advantage of Vimeo's innovative solutions like the AI-powered script generator, video prompter tool, automated captioning tool, and AI translation service for seamless video production.


More from the Vimeo blog

Learn how to color correct your footage, the difference between color grading vs. color correcting, and more.

Video color grading vs. color correction, explained

Optimizing light for virtual events, conference calls, and videos? Learn how to improve your webcam light and gear with this guide.

9 tips to upgrade your webcam light and gear setup

Learn the perfect three point lighting setup, master the difference between key light vs fill light, and best practices for great lighting.

What is three-point lighting? An introduction to 3 point lighting

Whether you want to look great for your next Zoom call or just shoot a new video, it's easy to improve your video lighting with these tips.

Video lighting tips and tricks for your next at-home shoot

Winter scene in a park

Let it snow: Our guide to winter lighting

Discover the vibrant world of color correction, learn how it use it, and boost the production value of your films.

Make your videos pop with color correction perfection

Learn how to utilize your DSLR's in-camera color and image settings to set the look and feel of your image before you even press record!

In-camera color and image settings

Green screens have become an essential tool for all filmmakers that allow you to pull off some crazy effects. Have you ever wondered how they work? Let"s check it out.

Green screen basics